High Quality Garage Services for the Banstead, Sutton & Epsom Area
Servicing & MOT Centre
High Quality Garage Services for the Banstead, Sutton & Epsom Area
Servicing & MOT Centre
High Quality Garage Services for the Banstead, Sutton & Epsom Area
Servicing & MOT Centre
High Quality Garage Services for the Banstead, Sutton & Epsom Area
Servicing & MOT Centre
High Quality Garage Services for the Banstead, Sutton & Epsom Area
Servicing & MOT Centre
previous arrow
next arrow
Slider

Information

Below, we have detailed exactly what is involved in our MOT testing and car servicing work. If, after reading through, you would like to book one of our garage services, please give one of staff members a call on 01737 357636. We cover all major locations in the nearby Surrey area including Sutton and Epsom. We are also available to provide customers with further information on new parts, air conditioning servicing, engine diagnostics and our wider service range.

Component of our MOT Testing Services

Since 1960, all vehicles over three years in age must undergo an annual test which determines how safe and roadworthy they are. Nork Motor Engineering provides fast, flexible and affordable MOT testing solutions from premises in Banstead, Surrey.
Nork Motor Engineering
Below, we have provided a list of everything our qualified engineers check during the MOT testing procedure:
number identify
seatbelt
cardoor
reg plate
fuel sys
car mirror
Steering
Exhaust Emissions
wheels
Wipers
Exhaust System
break
vehicle stracture
horn
windscreen
Lights
Seats

Vehicle Identification Number

If a vehicle was first used on or after the 1st of August 1980, it should not have more than one vehicle identification number present on it. The same number is permitted to be displayed in multiple places.

Vehicle Identification Number

Seatbelts

All compulsory seatbelts must be in place, in good condition, of the correct type, properly operational and securely anchored. Seats – The driver and front passenger seats should be secure while all backseats must be securable in an upright position.

Seatbelts

Doors

Must open and close properly and latch while in the closed position. Front doors must be openable from both outside and inside the vehicle. Rear doors will need to be opened to allow our engineers access to testable elements.

Doors

Registration Plate

The letters and numbers should be properly formatted and the plate itself should be in good condition, fully legible and securely attached to the car.

Registration Plate

Fuel System

The fuel cap must fasten and seal correctly and not allow leaks. Please ensure that if your fuel cap has a key, you bring it with you so we can open it up.

Fuel System

Mirrors

Securely fastened to the vehicle and in usable condition.

Mirrors

Steering and Suspension

Must be in good condition and operate properly.

Steering and Suspension

Exhaust Emissions

A vehicle cannot violate legal limits on exhaust emissions. The limit takes into account the car’s age and the fuel type it uses.

Exhaust Emissions

Wheels and Tyres

Tread depth, tyre size and type must be legal. General condition and how securely they are attached to the vehicle will also be inspected.

Wheels and Tyres

Wipers / Washers

Should not obscure the driver’s view of the road.

Wipers / Washers

Exhaust System

Must be secure and complete, silence effectively and not have major leakage.

Exhaust System

Brakes

Must perform properly when put through an efficiency test, which will evaluate their condition. Wheels will stay on while they are tested.

Brakes

Vehicle Structure

A vehicle should not have sharp edges and the chassis should not be badly corroded or damaged.

Vehicle Structure

Horn

Must work and be of a legal type.

Horn

Windscreen

Should be in good condition and not obscure a driver’s view.

Windscreen

Lights

All lights should be the correct colour, in good condition, operate properly and be securely attached to the vehicle. Headlamp aim will also be checked.

Lights

Seats

The driver and front passenger seats should be secure while all backseats must be securable in an upright position.

Seats

Scheduled and Interim Car Servicing Components

We offer basic and full annual car servicing options. Below, we have listed what is involved in the basic option and explained how the full annual servicing differs.

We check:

  1. Warning Lights
  2. Handbrake Travel
  3. Steering Operation
  4. Clutch Operation
  5. Engine Noise and Performance
  6. Transmission Noise and Operation
  7. Engine Operating Temperature
  8. Speedometer Functionality

We inspect:

  1. Horn Operation
  2. Front and Rear Side Light
  3. Main Lights
  4. Indicators and Hazard Lights
  5. Fog and Number Plate Lights
  6. Brake and Reverse Lamps
We look at:
  1. Wiper Operation and Condition
  2. Washer Operation and Alignment
  3. Windscreen and Mirror Condition
  4. Steering Column Security
  5. Pedal Rubber Condition
  6. Fuel Cap Condition and Type
We also lubricate your doors’ locks and hinges.

The next stage involves:

  1. Lubricating Battery Terminals
  2. Topping Up Battery Level
  3. Checking Battery Security
  4. Check Charge Rate

In both basic and full servicing packages, we check:

  1. Power Steering Column
  2. Cooling System
  3. Clutch Hydraulics and Cable
  4. Fan Belt and Auxiliary Drive Belts

We top up:

  1. Auto Transmission Fluid
  2. Coolant Anti-Freeze Strength
  3. Washer Bottles
  4. Clutch Fluid
  5. Brake Fluid

If you have requested a full annual service package, we will also check and replace the following if needed:

  1. Lubricate Throttle Linkage
  2. Crankcase Breather Hoses
  3. Fuel Filter
  4. Spark Plugs
  5. Check when Cam Belt due
  6. Air Filter

We will:

  1. Change the Engine Oil
  2. Replace the Engine Oil Filter
  3. Check for Oil Leaks

Next, we inspect:

  1. Fuel Line Condition
  2. Driveshaft Gaiter Condition
  3. Steering and Suspension
  4. Suspension Mountings and Springs
  5. Shock Condition and Mounting absorber
  6. Exhaust System and Mountings
  7. Wheel Bearing Play

We’ll finish this stage by greasing your vehicle’s suspension and steering.

We inspect tyre tread depth and general wear then inflate to ensure they maintain the recommended pressure.

This phase involves us checking:

  1. Front and Rear Brake Pads
  2. Pipes and Hoses

Full annual servicing also sees our engineers check:

  1. Callipers
  2. Cylinders
  3. Discs
  4. Drums
  5. Bonded or Riveted Shoes

If your car needs servicing or if you require us for MOT testing, give Nork Motor Engineering of Banstead a call on 01737 357636.